The Conker Resurfacing Process
Step By Step From First Hello To Final Handshake
Choosing the Conker resurfacing process means choosing clarity, communication and a finish that feels close to brand new concrete. Our team guides you through every stage so the experience feels organised, respectful and easy. The process below shows exactly how we bring your concrete back to life.
1. Welcome, Walkthrough and Scope Check in the Conker Resurfacing Process
We begin every project with a proper hello. Your team leader introduces the crew, walks the site with you and confirms the agreed scope. During this walkthrough, we check measurements, colours, finishes and edges. We also answer questions and discuss any optional upgrades. This first step ensures everyone starts aligned and confident.
2. Site Assessment and Safety Setup Before Resurfacing Begins
Next, we record the condition of your concrete and surrounding areas. This record protects both you and us. After that, the team gathers for a short pre start meeting to review the plan, address risks and confirm the best places for tools, access and cleanup. We set clear work zones and wear the correct protective gear so your family, pets and visitors stay safe.
3. Deep Clean, Etching and Pressure Washing to Prepare for Resurfacing
Preparation drives performance, so we begin by opening the surface with acid etching. We then pressure wash the slab to remove residue, dirt and contaminants. Our team cleans surrounding areas as well to keep everything tidy. By the end of this step, the concrete is ready to bond with the resurfacing system.
4. Crack Treatment and Joint Preparation in the Resurfacing Process
Older slabs often show cracks, so we manage them honestly. Our team chases out structural cracks and fills them with high strength repair compounds. Hairline and shrinkage cracks receive the correct treatment for their type. We also clear existing control joints so they function as intended. Because concrete moves naturally, some cracks may return over time, but proper preparation reduces the chance.
5. Asset Protection and Taping for a Clean Resurfacing Finish
Before applying any products, we protect your home. Our team tapes walls, frames and posts. We mask brick, timber, render and cladding. We cover garage doors and shield gardens, turf and stones with care. We also tape around drains and joints so the finish looks clean and precise. Thoughtful protection creates a premium result.
6. Priming and Base Coat Application in the Conker Resurfacing Process
Now the resurfacing begins. We apply a primer that bonds strongly to the slab and allows a smooth application. After this, we spread the base coat. In the Conker resurfacing process, we use the least amount of material needed for strength and longevity. This approach reduces stress in the system and supports long term durability. Edges and joints receive careful attention for a seamless finish.
7. Texture, Design and Top Coats to Shape Your Final Surface
Once the base coat cures enough to walk on, we move into the design stage. Depending on the finish you choose, we may apply a full spray coat, add slip resistant texture, create borders or patterns or use gentle flecking to mimic natural concrete. Each layer is applied evenly so the end result looks cohesive and authentic.
8. Sealing for Protection and Longevity in the Resurfacing System
Sealing protects your resurfacing from sun, weather and daily traffic. We apply the first coat to shield the new surface and then place a second coat after curing. The sealer absorbs most of the wear so the resurfacing beneath stays strong. We let you know exactly when you can walk or drive on the surface so it cures properly.
9. Clean Up and Final Presentation at the End of the Process
After sealing, we clean the entire area. Our team removes masking, blows down the slab, wipes nearby surfaces and packs equipment neatly. Your team leader inspects the project closely and corrects anything that needs attention. When everything looks right, we invite you to review the final result.
10. Handover, Aftercare and Next Steps in the Conker Resurfacing Process
At handover, we explain how the surface cures, when you can use it and what to expect in the first few weeks. We walk you through care tips and help you plan your first reseal. After signing off the project, we answer final questions and show you how to join our maintenance program so your resurfacing stays fresh for years.
→ Read: [Inside Conker: Laying the Foundations for 2026]
What You Can Expect From Conker Throughout the Entire Process
When you choose Conker, you can expect:
• a calm and professional team
• respect for your home, time and neighbours
• thoughtful protection and clean workmanship
• a finish that looks close to brand new concrete
• clear communication from the first hello to the last handshake
If you want to see how the Conker resurfacing process would look at your home, we are ready to help.
